Android devices are the most widely used operating system for mobile devices in the world today. This is because Android OS is flexible, has customize-able features and wide range of usability. Certainly, the gains of android are huge compared to other mobile operating systems. However, android has its attendant challenges too. Nevertheless, most problems of android can be fixed by flashing. Do not be alarmed. It does not mean flashing a torch light. I will explain what it means to flash a dead android phone to restore it back to life. I shall also show you the procedures involved in flashing android phones and devices in this article. Therefore, is your phone faulty or does not power, see below to flash dead android phone to restore life. However, the greatest fears of a user on android OS are;
- physical damage
- virus attack
- Application or system crash
- Operating System OS corruption.
Fortunately, all shortcomings of the android OS listed above can be fixed when they occur as said earlier. However, a physical or hardware damage may be difficult or impossible to fix depending on the degree of damage.
There are many techniques and ways to flash android devices and restore them to life. However, we shall focus on how to flash dead android phone that fails to power On. Do not think that your phone is gone forever just because it no longer powers on. Despite power failure, a flashing technique which I explained below can restore your android device.
Flashing Android that fails to Power On
Therefore, fixing any android device problems arising from software-related conflicts lies in flashing the android device. Flashing an android can restore your phone even when the device fails to power on. It is possible to flash a dead android, which does not power on using a software known as dr.fone – Repair.
How to Flash Dead Android Phone Using the dr.fone – Repair Method
Using a dr.fone – Repair to flash android devices is very effective and applies to all versions of the Android Operating Systems. The steps are clearly illustrated below. But before that, there is something you must do to get your phone ready for flashing.
Back Up your Phone or Device Before Flashing
It is important to note that flashing is like recreating a device to be born anew. All data or information in that device is lost and lost forever. Therefore, it is necessary to back up all your data as much as you can before commencing on the process of flashing the android device. Once done, then you may start. Here are the steps to guild you in flashing a dead android device or phone
- On a computer or PC, download the dr.fone – Repair.
- Tap on ‘REPAIR’ and get your Android device connected to it using a USB cable.
- Click ‘Android Repair’ from the available options, and then press the ‘Start’ button to flash Dead Android phone to fix it.
A device information screen appears on your computer. On this device information screen, pick the appropriate device brand, name, model and other details and then tap the ‘Next’ button.
Key in ‘000000’ to confirm your actions. This brings you to the second phase of flashing your android device.
How to Activate “Download Mode” to Flash Dead Android Phone
In this second phase of flashing a dead android phone or device, it is essential to Put your Android device in “Download mode”. Then start the repair, which is the flashing in another term.
Similarly, it is essential to boot your Android device in this “Download mode” prior to repairing. If the device has a ‘Home’ button, turn it off. Hold down the ‘Volume Down’, ‘Home’, and ‘Power’ buttons altogether for 5-10 seconds. Release all of them at same time and hit the ‘Volume Up’ button for entering ‘Download’ model.
In the absence of a ‘Home’ button: Switch off the Android device and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for 5 to 10 seconds. Afterwards, release all the buttons at same time. Hit ‘Volume Up’ button to enter ‘Download’ mode. Having entered the Download Mode, you are ready to begin the flash repair of your android Phone. Follow these procedures below.
Press the ‘Next’ button to initiate firmware download. Once the firmware gets downloaded and verified by dr.fone –Repair, flashing commences for your Dead Android phone. All the Android system issues will be fixed soon after.
This important method on how to flash dead android device is applicable to all versions of android – lollipop, marshmallow, etc. Furthermore, it is very effective in resolving all android OS problems.
