SLTv is great in its clear dual satellite reception capabilities – Free-to-Air (FTA) and paid subscription. Each reception has its package or bouquet of channels as well as a separate satellite dish. Consequently, separate satellite dish and frequency settings exist, through which one can receive the SLTv free-to-Air and the SLTv paid subscription channels. In this article, we shall analyze the functions and frequency settings of the SLTv 2 – Dish Setup as well as their settings and frequencies for optimal FTA and subscription receptions on SLTv.
1. Two Dishes, One Decoder
SLTV allows you to use two separate satellite dishes, both connected to the same SLTV decoder. One dish is dedicated to receiving SLTV’s subscription channels, while the other is pointed at free-to-air (FTA) satellites. This lets you access both categories—paid and free—through a single decoder
2. Different Tracking & Frequency Settings
Each dish must be properly aligned and configured with different tracking parameters and frequency settings, depending on whether it’s capturing the SLTV service or FTA channels.

3. Channel Scanning
You use the SLTV decoder’s menu—typically under “System Settings” → “Antenna Setup” or “Channel Scan”—to scan and detect both FTA and subscription channels. Post-scan, all discovered channels will appear in one unified list, regardless of which dish they came from
Advantages of the SLTv 2 – Dish Setup
- SLTV supports a **dual-dish configuration** to receive both subscription and free-to-air channels through a single decoder. This presents a cheaper dual channel platform system compared to others that require two or multiple decoders.
- Each dish must be aligned and configured individually, making for specificity and clarity.
- A single channel scan consolidates both sources into one interface. One effort, dual rewards.
- This approach avoids having to use multiple decoders and simplifies switching between channel categories
two satellite
Satellite Frequency Settings for SLTv 2-Dish Setup
If you’re looking to receive SLTV’s Free-to-Air satellite signal, here’s the accurate and up-to-date technical setup information:
For instance, here are the SLTV Free-to-Air Frequency Settings for Nigeria, Cameroon etc
FTA Frequency and Satellite Settings on SLTv 2-Dish Setup
To tune into SLTV on your satellite receiver or FTA (Free-to-Air) decoder, use the following parameters:
Frequency (FEC): 10973 MHz
Polarization: Horizontal (H)
Symbol Rate: 25,000 ksym/s
Satellite Position: Belintersat-1 at 51.5° E
([VtuBase][1], [Paybeta][2])
These are the standard transponder settings for receiving SLTV’s clear-to-air channels without requiring a subscription.
Paid Subscription Frequency and Satellite Settings on SLTv 2-Dish Setup
1. Dish 2 should be aligned accurately to the satellite at \~51° East, using the settings above.
Next Steps & Suggestions
- For dual-dish operations, consult with a satellite installer or technician experienced in multi-dish configurations and signal distribution.
- Use the Metro Digital SLTV app for subscriptions and recharge. The app is available on Android and requires your SB number (found on the decoder).