Boosting DStv signal for many subscribers have remained almost an impossible task. This is because many think that only paid installers can increase DStv signal strength and quality. But there is good news! The truth is that there are little things you could do to restore decoder signals. Although there are may be many ways to increase DStv signal, I have brought them together for your use. Therefore, the steps I listed in this article proves trusted ways to increase DStv signal strength and quality. No matter how it is, these steps can take care of your signal challenges.
Do These Methods work only for DStv?
The answer is NO. As a digital satellite TV service, DStv works in tandem with all other DTH (Direct-to-Home) pay-TV services. They obey same principle of signal up-linking and down-linking. Therefore, whatever causes signal loss in DStv would also result to same effect in other satellite TV services. Example of other digital satellite TV services are the MyTV, Startimes Dish, TStv etc. However, it becomes easy to resolve any loss of signal from any satellite dish TV using the complete solutions for boosting signals as provided in this article. For the sake of this article, we shall use DStv to represent all other satellite TV you may have. The methods work for all of them as listed below.
Methods to Fix Signal Problem on DStv – All Satellite TV
As said earlier, the methods recommended in this article works for all manner of digital satellite TV services. DStv is just one of them. However, we shall take these suggested methods and explain them one after another.
Check F-Connectors
The F-Connector is the small device like a screw used to attach a coaxial or RF wire to devices by screwing them to each other. Although F-Connectors may appear small in size, they are very important in all TV system connections. In any signal problem involving a satellite TV connection, the F-Connector is the first aspect to check. However, the F-Connector is present throughout the entire setup of a satellite dish system. Here are installation points to look out for F-Connectors with a view to checking them to increase DStv signals;
- LNB to wire point of connection at the satellite dish mouth
- wire to decoder point of connection located behind the receiver box
- From same back of decoder to any other attached device and to the back of the TV
Therefore, there is need to adjust the connection fitness of the F-Connectors in order to boost DStv signal reception. The minutest out of place joining could lead to signal drop or outright loss.
LNB (Signal Captor) Re-alignment to Boost DStv Signal
The LNB (Low noise Block-down) captures the signals, which strikes the dish pan directly from orbital down-linking satellites. However, the LNB must adopt a certain alignment in order to trap these signals. Otherwise, it would be useless. Due to wind or other factors, the LNB may go out of alignment thereby causing signal drop. Therefore, a little re-alignment of the LNB device will surely increase DStv signal, same also for other satellite TV. To align an LNB, ensure that the wire connecting point is either placed horizontally or a bit slanted. most satellite TV for Africa on KU Band adopted the Horizontal positioning for LNBs to trap signals successfully. However, smart LNB is most common for better signal and complex satellite connections.
Sometimes, you might try all you can without still picking up signal. These usually happens when the LNB has grown weak and possibly needs changing. Therefore, you could easily buy from the market and change the LNB following same laid down guildlines.
Satellite Dish Adjustment for increased DStv Signal
This is the commonest ways to correct defects and increase DStv signals. In most cases, both the LNB, F-Connectors and the entire setup automatically adjusts properly when the entire dish pan is re-aligned. This is so because the satellite dish pan houses the entire external setup for signal capturing. however, dish alligning requires a professional execution unlike the others that may be done by you. Therefore, we recommend you engage a competent and accredited installer for this particular service. Furthermore, dish aligning requires the use of articulated devices for proper tracking of signal receptions on DStv and other services.
Trees and other Obstructions
You cannot mount your satellite dish at the foot of a full-grown tree and expect to hit some signals. As long as their are obstructions preventing the dish from direct sky, signal would suffer. Therefore, it is recommended that tress are cut down or pruned such that the dish sees the sky in order to increase DStv signals. Similarly, you do not install DStv or any satellite dish where buildings are too clustered that they cover the sky. The best position to install a satellite dish is where it would have broad and direct contact with the sky.
Weather and Natural Factors Work against Boosting DStv Signals
Indeed, bad weather such as rain and windy storm hamper good signal reception on DStv. Also, they happen to any other satellite TV operating on the KU Band. These are termed as natural factors and may not have any complete remedy. However, there are also ways to Stop signal loss due to bad weather or storm for DStv and others.
I have added a 20 dB in line amplifier, the reception is perfect no loss of signal at all but the tuner reports 25% signal strength and 12% quality. Before adding the amplifier the signal strength was 51% and 87% quality and the signal was lost continuously. Why does the decoder behave so different?y.